View R75PD1150DQ4-J_3875795.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

09/2008 105 r75 mkp series high performances me t a ll i z e d po lypropylene fi l m capaci t or d .c. an d pu l se app l ica t ions t ypical applications : defection circuits in tv-sets and monitors (s-correction), resonant capacitor in electronic ballast and compact lamp, power factor correction and coupling capacitor in smps, timing and oscillator circuits. product code: r75 (digit 12: 0 to 9) general technical d at a dielectric: polypropylene flm. plates: aluminium layer deposited by evaporation under vacuum. winding: non-inductive type. leads: f or ? 0,6mm : tinned wire for ? = 0,5mm : tinned wire, low thermical conductivity protection: plastic case, thermosetting resin flled. box material is solvent resistant and fame retardant according to ul94 v0. marking: manufacturers logo, series (r75), dielectric code (mkp), capacitance, tolerance, d.c. rated voltage, manufacturing date code. climatic category: 55/105/56 iec 60068-1 operating temperature range: -55 to +105c related documents: iec 60384-16 ? d 0.05 p=7.5 p = 10 15 p 27.5 p = 37.5 0.5 0.6 0.8 1.0 all dimensions are in mm. product code system the part number, comprising 14 digits, is formed as follows: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 r 7 5 - digit 1 to 3 series code. digit 4 d.c. rated voltage: g = 160v i = 250v m= 400v p = 630v q = 1000v r= 1250v t = 1600v u = 2000v digit 5 pitch: d = 7.5 mm; f = 10 .0 mm; i = 15 .0 mm; n = 22.5 mm; r = 27.5mm; w = 37.5mm digit 6 to 9 digits 7 - 8 - 9 indicate the frst three digits of capacitance value and the 6th digit indicates the number of zeros that must be added to obtain the rated capacitance in pf. digit 10 to 11 mechanical version and/or packaging (table 1) digit 12 identifes the dimensions and electrical characteristics (0 to 9). digit 13 internal use. digit 14 capacitance tolerance: j=5%; k=10%; m=20% table 1 (for more detailed information, please refer to pages 14). standard packaging style lead length t aping style ordering code (mm) p 2 (mm) fig. (no.) pitch (mm) (digit 10 to 11) ammo-pack 0 6.35 1 7.5 dq ammo-pack 12.70 2 10.0/15.0 dq ammo-pack 19.05 3 22.5 dq reel ? 355mm 0 6.35 1 7.5 ck reel ? 355mm 12.70 2 10.0/15.0 gy reel ? 500mm 12.70 2 10.0/15.0 ck reel ? 500mm 19.05 3 22.5/27.5 ck loose, short leads 0 4 +2 aa loose, long leads (p < 10mm) 17 +1/-2 z3 loose, long leads (p10mm) 18 +1/-1 jm loose, long leads (p 15mm) 30 +5 25 +2/-1 40 50 note: ammo-pack is the preferred packaging for taped version. loose taped fig. 1 fig. 2 fig. 3 pitch box thickness maximum dimensions (mm) (mm) (mm) b max h max l max 7.5 all b +0.1 h +0.1 l +0.2 10.0 all b +0.2 h +0.1 l +0.2 15.0 <7.5 b +0.2 h +0.1 l +0.3 15.0 7.5 b +0.2 h +0.1 l +0.5 22.5 all b +0.2 h +0.1 l +0.3 27.5 all b +0.2 h +0.1 l +0.3 37.5 all b +0.3 h +0.1 l +0.3
09/2008 106 r75 mkp series high performances me t a ll i z e d po lypropylene fi l m capaci t or d .c. an d pu l se app l ica t ions product code: r75 (digit 12: 0 to 9) rated cap. 160vdc / 90vac std dimensions max dv/dt max k 0 part number b h l p (v/ s) (v 2 s) 0.068 f 4.0 9.0 10.0 7.5 300 74 e3 r75gd2680--4-- 0.082 f 4.0 9.0 10.0 7.5 300 74 e3 r75gd2820--4-- 0.10 f 5.0 10.5 10.0 7.5 300 74 e3 r75gd3100--4-- 0.12 f 5.0 10.5 10.0 7.5 300 74 e3 r75gd3120--4-- 0.15 f 6.0 12.0 10.5 7.5 300 74 e3 r75gd3150--0-- 0.18 f 6.0 12.0 10.5 7.5 300 74 e3 r75gd3180--3-- 0.082 f 4.0 9.0 13.0 10.0 180 58 e3 r75gf 2820--0-- 0.10 f 4.0 9.0 13.0 10.0 180 58 e3 r75gf 3100--3-- 0.12 f 5.0 11.0 13.0 10.0 180 58 e3 r75gf 3120--0-- 0.15 f 5.0 11.0 13.0 10.0 180 58 e3 r75gf 3150--0-- 0.18 f 6.0 12.0 13.0 10.0 180 58 e3 r75gf 3180--0-- 0.22 f 6.0 12.0 13.0 10.0 180 58 e3 r75gf 3220--3-- 0.18 f 5.0 11.0 18.0 15.0 100 32 e3 r75gi 3180--0-- 0.22 f 5.0 11.0 18.0 15.0 100 32 e3 r75gi 3220--0-- 0.27 f 6.0 12.0 18.0 15.0 100 32 e3 r75gi 3270--0-- 0.33 f 6.0 12.0 18.0 15.0 100 32 e3 r75gi 3330--0-- 0.39 f 7.5 13.5 18.0 15.0 100 32 e3 r75gi 3390--0-- 0.47 f 7.5 13.5 18.0 15.0 100 32 e3 r75gi 3470--0-- 0.47 f 9.0 12.5 18.0 15.0 100 32 e3 r75gi 3470--6-- 0.56 f 8.5 14.5 18.0 15.0 100 32 e3 r75gi 3560--0-- 0.56 f 9.0 12.5 18.0 15.0 100 32 e3 r75gi 3560--6-- 0.68 f 8.5 14.5 18.0 15.0 100 32 e3 r75gi 3680--0-- 0.68 f 13.0 12.0 18.0 15.0 100 32 e3 r75gi 3680--6-- 0.82 f 10.0 16.0 18.0 15.0 100 32 e3 r75gi 3820--0-- 1.0 f 10.0 16.0 18.0 15.0 100 32 e3 r75gi 4100--0-- mechanical version and packaging (table1) internal use tolerance: j (5%); k (10%); m (20%) all dimensions are mm. note: if the working voltage (v) is lower than the rated voltage (v r ), the capacitor may work at higher dv/dt. in this case the maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio v r /v. the pulse characteristic k 0 depends on the voltage wave-form and in any case it cannot overcome the value given in the above table. the dv/dt test is carried out at 2 times the above values. 1 section (160vdc) single sided metallized polypropylene flm rated cap. 160vdc / 90vac std dimensions max dv/dt max k 0 part number b h l p (v/ s) (v 2 / s) 0.82 f 7.0 16.0 26.5 22.5 60 19 e3 r75gn 3820--0-- 1.0 f 7.0 16.0 26.5 22.5 60 19 e3 r75gn 4100--0-- 1.2 f 8.5 17.0 26.5 22.5 60 19 e3 r75gn 4120--0-- 1.5 f 10.0 18.5 26.5 22.5 60 19 e3 r75gn 4150--0-- 1.8 f 10.0 18.5 26.5 22.5 60 19 e3 r75gn 4180--0-- 1.5 f 9.0 17.0 32.0 27.5 50 16 e3 r75gr 4150--0-- 1.8 f 9.0 17.0 32.0 27.5 50 16 e3 r75gr 4180--0-- 2.2 f 11.0 20.0 32.0 27.5 50 16 e6 r75gr 4220--3-- 2.7 f 11.0 20.0 32.0 27.5 50 16 e3 r75gr 4270--0-- 3.3 f 13.0 22.0 32.0 27.5 50 16 e3 r75gr 4330--0-- 3.9 f 13.0 22.0 32.0 27.5 50 16 e3 r75gr 4390--0-- 4.7 f 13.0 25.0 32.0 27.5 50 16 e3 r75gr 4470--3-- 5.6 f 14.0 28.0 32.0 27.5 50 16 e3 r75gr 4560--0-- 6.8 f 18.0 33.0 32.0 27.5 50 16 e3 r75gr 4680--0-- 8.2 f 18.0 33.0 32.0 27.5 50 16 e3 r75gr 4820--0-- 10.0 f 22.0 37.0 32.0 27.5 50 16 e3 r75gr 5100--0-- 12.0 f 22.0 37.0 32.0 27.5 50 16 e3 r75gr 5120--0-- 3.3 f 11.0 22.0 41.5 37.5 35 11 e3 r75gw 4330--0-- 3.9 f 11.0 22.0 41.5 37.5 35 11 e3 r75gw 4390--0-- 4.7 f 11.0 22.0 41.5 37.5 35 11 e3 r75gw 4470--0-- 5.6 f 13.0 24.0 41.5 37.5 35 11 e3 r75gw 4560--0-- 6.8 f 16.0 28.5 41.5 37.5 35 11 e3 r75gw 4680--0-- 8.2 f 16.0 28.5 41.5 37.5 35 11 e3 r75gw 4820--0-- 10.0 f 19.0 32.0 41.5 37.5 35 11 e3 r75gw 5100--0-- 12.0 f 19.0 32.0 41.5 37.5 35 11 e3 r75gw 5120--0-- 15.0 f 20.0 40.0 41.5 37.5 35 11 e3 r75gw 5150--0-- 18.0 f 20.0 40.0 41.5 37.5 35 11 e3 r75gw 5180--0-- 22.0 f 24.0 44.0 41.5 37.5 35 11 e3 r75gw 5220--0-- 27.0 f 30.0 45.0 41.5 37.5 35 11 e3 r75gw 5270--0-- 33.0 f 30.0 45.0 41.5 37.5 35 11 e3 r75gw 5330--0-- mechanical version and packaging (table1) internal use tolerance: j (5%); k (10%); m (20%) rated cap. 160vdc / 70vac reduced sizes max dv/dt max k 0 part number b h l p (v/ s) (v 2 / s) 0.10 f 4.0 9.0 10.0 7.5 100 32 e3 r75gd 3100--b-- 0.12 f 5.0 10.5 10.0 7.5 100 32 e3 r75gd 3120--b-- 0.15 f 5.0 10.5 10.0 7.5 100 32 e3 r75gd 3150--b-- 0.18 f 6.0 12.0 10.5 7.5 100 32 e3 r75gd 3180-- a-- 0.22 f 6.0 12.0 10.5 7.5 100 32 e3 r75gd 3220--a-- 0.12 f 4.0 9.0 13.0 10.0 90 28 e3 r75gf 3120--a-- 0.15 f 4.0 9.0 13.0 10.0 90 28 e3 r75gf 3150--a-- 0.18 f 5.0 11.0 13.0 10.0 90 28 e3 r75gf 3180--a-- 0.22 f 5.0 11.0 13.0 10.0 90 28 e3 r75gf 3220--a-- 0.27 f 6.0 12.0 13.0 10.0 90 28 e3 r75gf 3270--a-- 0.33 f 6.0 12.0 13.0 10.0 90 28 e3 r75gf 3330--a -- the derating curves of previous table are not included this catalogue, available upon request.
09/2008 107 r75 mkp series high performances me t a ll i z e d po lypropylene fi l m capaci t or d .c. an d pu l se app l ica t ions product code: r75 (digit 12: 0 to 9) rated cap. 250vdc / 160vac std dimensions max dv/dt max k 0 part number b h l p (v/ s) (v 2 / s) 0.027 f 4.0 9.0 10.0 7.5 650 150 e3 r75id 2270--4-- 0.033 f 4.0 9.0 10.0 7.5 650 150 e3 r75id 2330--4-- 0.039 f 4.0 9.0 10.0 7.5 650 150 e3 r75id 2390--4-- 0.047 f 4.0 9.0 10.0 7.5 650 150 e3 r75id 2470--4-- 0.056 f 4.0 9.0 10.0 7.5 650 150 e3 r75id 2560--4-- 0.068 f 5.0 10.5 10.0 7.5 650 150 e3 r75id 2680--4-- 0.082 f 5.0 10.5 10.0 7.5 650 150 e3 r75id 2820--4-- 0.10 f 6.0 12.0 10.5 7.5 650 150 e3 r75id 3100--3-- 0.12 f 6.0 12.0 10.5 7.5 650 150 e3 r75id 3120--3-- 0.033 f 4.0 9.0 13.0 10.0 550 140 e3 r75if 2330--0-- 0.039 f 4.0 9.0 13.0 10.0 550 140 e3 r75if 2390--0-- 0.047 f 4.0 9.0 13.0 10.0 550 140 e3 r75if 2470--3-- 0.056 f 4.0 9.0 13.0 10.0 550 140 e3 r75if 2560--3-- 0.068 f 4.0 9.0 13.0 10.0 550 140 e3 r75if 2680--3-- 0.082 f 5.0 11.0 13.0 10.0 550 140 e3 r75if 2820--3-- 0.10 f 5.0 11.0 13.0 10.0 550 140 e3 r75if 3100--3-- 0.12 f 6.0 12.0 13.0 10.0 550 140 e3 r75if 3120--3-- 0.15 f 6.0 12.0 13.0 10.0 550 140 e3 r75if 3150--3-- 0.12 f 5.0 11.0 18.0 15.0 300 100 e3 r75ii 3120--3-- 0.15 f 5.0 11.0 18.0 15.0 300 100 e3 r75ii 3150--3-- 0.18 f 5.0 11.0 18.0 15.0 300 100 e3 r75ii 3180--4-- 0.22 f 5.0 11.0 18.0 15.0 300 100 e3 r75ii 3220--4-- 0.27 f 6.0 12.0 18.0 15.0 300 100 e3 r75ii 3270--4-- 0.33 f 6.0 12.0 18.0 15.0 300 100 e3 r75ii 3330--4-- 0.39 f 7.5 13.5 18.0 15.0 300 100 e3 r75ii 3390--4-- 0.39 f 9.0 12.5 18.0 15.0 300 100 e3 r75ii 3390--7-- 0.47 f 7.5 13.5 18.0 15.0 300 100 e3 r75ii 3470--4-- 0.47 f 9.0 12.5 18.0 15.0 300 100 e3 r75ii 3470--8-- 0.56 f 7.5 13.5 18.0 15.0 300 100 e3 r75ii 3560--4-- 0.56 f 9.0 12.5 18.0 15.0 300 100 e3 r75ii 3560--8-- 0.68 f 8.5 14.5 18.0 15.0 300 100 e3 r75ii 3680--4-- 0.68 f 13.0 12.0 18.0 15.0 300 100 e3 r75ii 3680--8-- 0.82 f 10.0 16.0 18.0 15.0 300 100 e3 r75ii 3820--4-- 0.82 f 13.0 12.0 18.0 15.0 300 100 e3 r75ii 3820--8-- 1.0 f 10.0 16.0 18.0 15.0 300 100 e3 r75ii 4100--4-- 1.2 f 11.0 19.0 18.0 15.0 300 100 e3 r75ii 4120--4-- 1 section (250vdc) single sided metallized polypropylene flm mechanical version and packaging (table1) internal use tolerance: j (5%); k (10%); m (20%) mechanical version and packaging (table1) internal use tolerance: j (5%); k (10%); m (20%) all dimensions are mm. note: if the working voltage (v) is lower than the rated voltage (v r ), the capacitor may work at higher dv/dt. in this case the maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio v r /v. the pulse characteristic k 0 depends on the voltage wave-form and in any case it cannot overcome the value given in the above table. the dv/dt test is carried out at 2 times the above values. rated cap. 250vdc / 160vac std dimensions max dv/dt max k 0 part number b h l p (v/ s) (v 2 / s) 0.39 f 6.0 15.0 26.5 22.5 125 63 e3 r75in 3390--3-- 0.47 f 6.0 15.0 26.5 22.5 125 63 e3 r75in 3470--3-- 0.56 f 6.0 15.0 26.5 22.5 125 63 e3 r75in 3560--4-- 0.68 f 6.0 15.0 26.5 22.5 125 63 e3 r75in 3680--4-- 0.82 f 7.0 16.0 26.5 22.5 125 63 e3 r75in 3820--4-- 1.0 f 7.0 16.0 26.5 22.5 125 63 e3 r75in 4100--4-- 1.2 f 8.5 17.0 26.5 22.5 125 63 e3 r75in 4120--4-- 1.5 f 10.0 18.5 26.5 22.5 125 63 e3 r75in 4150--4-- 1.8 f 10.0 18.5 26.5 22.5 125 63 e3 r75in 4180--4-- 2.2 f 11.0 20.0 26.5 22.5 125 63 e3 r75in 4220--4-- 2.7 f 13.0 22.0 26.5 22.5 125 63 e3 r75in 4270--4-- 3.3 f 13.0 22.0 26.5 22.5 125 63 e3 r75in 4330--4-- 1.0 f 9.0 17.0 32.0 27.5 100 50 e3 r75ir 4100--3-- 1.2 f 9.0 17.0 32.0 27.5 100 50 e3 r75ir 4120--3-- 1.5 f 9.0 17.0 32.0 27.5 100 50 e3 r75ir 4150--4-- 1.8 f 9.0 17.0 32.0 27.5 100 50 e3 r75ir 4180--4-- 2.2 f 11.0 20.0 32.0 27.5 100 50 e3 r75ir 4220--5-- 2.7 f 11.0 20.0 32.0 27.5 100 50 e3 r75ir 4270--4-- 3.3 f 13.0 22.0 32.0 27.5 100 50 e3 r75ir 4330--4-- 3.9 f 13.0 22.0 32.0 27.5 100 50 e3 r75ir 4390--4-- 4.7 f 13.0 25.0 32.0 27.5 100 50 e3 r75ir 4470--5-- 5.6 f 14.0 28.0 32.0 27.5 100 50 e3 r75ir 4560--4-- 6.8 f 18.0 33.0 32.0 27.5 100 50 e3 r75ir 4680--4-- 8.2 f 18.0 33.0 32.0 27.5 100 50 e3 r75ir 4820--4-- 10.0 f 22.0 37.0 32.0 27.5 100 50 e3 r75ir 5100--4-- 12.0 f 22.0 37.0 32.0 27.5 100 50 e3 r75ir 5120--4-- 3.3 f 11.0 22.0 41.5 37.5 40 20 e3 r75iw 4330--4-- 3.9 f 11.0 22.0 41.5 37.5 40 20 e3 r75iw 4390--4-- 4.7 f 11.0 22.0 41.5 37.5 40 20 e3 r75iw 4470--4-- 5.6 f 13.0 24.0 41.5 37.5 40 20 e3 r75iw 4560--4-- 6.8 f 16.0 28.5 41.5 37.5 40 20 e3 r75iw 4680--4-- 8.2 f 16.0 28.5 41.5 37.5 40 20 e3 r75iw 4820--4-- 10.0 f 19.0 32.0 41.5 37.5 40 20 e3 r75iw 5100--4-- 12.0 f 19.0 32.0 41.5 37.5 40 20 e3 r75iw 5120--4-- 15.0 f 20.0 40.0 41.5 37.5 40 20 e3 r75iw 5150--4-- 18.0 f 20.0 40.0 41.5 37.5 40 20 e3 r75iw 5180--4-- 22.0 f 24.0 44.0 41.5 37.5 40 20 e3 r75iw 5220--4-- 27.0 f 24.0 44.0 41.5 37.5 40 20 e3 r75iw 5270--4-- 33.0 f 30.0 45.0 41.5 37.5 40 20 e3 r75iw 5330--4-- rated cap. 250vdc / 140vac reduced sizes max dv/dt max k 0 part number b h l p (v/ s) (v 2 / s) 0.068 f 4.0 9.0 10.0 7.5 180 90 e3 r75id 2680--b-- 0.082 f 4.0 9.0 10.0 7.5 180 90 e3 r75id 2820--b-- 0.10 f 5.0 10.5 10.0 7.5 180 90 e3 r75id 3100--b-- 0.12 f 5.0 10.5 10.0 7.5 180 90 e3 r75id 3120--b-- 0.15 f 6.0 12.0 10.5 7.5 180 90 e3 r75id 3150--a-- 0.18 f 6.0 12.0 10.5 7.5 180 90 e3 r75id 3180--a-- 0.082 f 4.0 9.0 13.0 10.0 150 75 e3 r75if 2820--a-- 0.10 f 4.0 9.0 13.0 10.0 150 75 e3 r75if 3100-- a-- 0.12 f 5.0 11.0 13.0 10.0 150 75 e3 r75if 3120--a-- 0.15 f 5.0 11.0 13.0 10.0 150 75 e3 r75if 3150--a-- 0.18 f 6.0 12.0 13.0 10.0 150 75 e3 r75if 3180--a-- 0.22 f 6.0 12.0 13.0 10.0 150 75 e3 r75if 3220--a -- the derating curves of previous table are not included this catalogue, available upon request.
09/2008 108 r75 mkp series high performances me t a ll i z e d po lypropylene fi l m capaci t or d .c. an d pu l se app l ica t ions product code: r75 (digit 12: 0 to 9) 1 section (400vdc) single sided metallized polypropylene flm rated cap. 400vdc / 220vac* std dimensions max dv/dt max k 0 part number b h l p (v/ s) (v 2 / s) 0.010 f 4.0 9.0 10.0 7.5 1500 360 e3 r75md 2100--4-- 0.012 f 4.0 9.0 10.0 7.5 1500 360 e3 r75md 2120--4-- 0.015 f 4.0 9.0 10.0 7.5 1500 360 e3 r75md 2150--4-- 0.018 f 4.0 9.0 10.0 7.5 1500 360 e3 r75md 2180--4-- 0.022 f 4.0 9.0 10.0 7.5 1500 360 e3 r75md 2220--4-- 0.027 f 5.0 10.5 10.0 7.5 1500 360 e3 r75md 2270--4-- 0.033 f 5.0 10.5 10.0 7.5 1500 360 e3 r75md 2330--4-- 0.039 f 6.0 12.0 10.5 7.5 1500 360 e3 r75md 2390--3-- 0.047 f 6.0 12.0 10.5 7.5 1500 360 e3 r75md 2470--3-- 0.015 f 4.0 9.0 13.0 10.0 1300 336 e3 r75f 2150--0-- 0.018 f 4.0 9.0 13.0 10.0 1300 336 e3 r75f 2180--0-- 0.022 f 4.0 9.0 13.0 10.0 1300 336 e3 r75f 2220--3-- 0.027 f 4.0 9.0 13.0 10.0 1300 336 e3 r75f 2270--3-- 0.033 f 5.0 11.0 13.0 10.0 1300 336 e3 r75f 2330--3-- 0.039 f 5.0 11.0 13.0 10.0 1300 336 e3 r75f 2390--3-- 0.047 f 5.0 11.0 13.0 10.0 1300 336 e3 r75f 2470--3-- 0.056 f 6.0 12.0 13.0 10.0 1300 336 e3 r75f 2560--3-- 0.068 f 6.0 12.0 13.0 10.0 1300 336 e3 r75f 2680--3-- 0.068 f 5.0 11.0 18.0 15.0 900 240 e3 r75mi 2680--3-- 0.082 f 5.0 11.0 18.0 15.0 900 240 e3 r75mi 2820--3-- 0.10 f 5.0 11.0 18.0 15.0 900 240 e3 r75mi 3100--3-- 0.12 f 6.0 12.0 18.0 15.0 900 240 e3 r75mi 3120--3-- 0.15 f 6.0 12.0 18.0 15.0 900 240 e3 r75mi 3150--3-- 0.18 f 7.5 13.5 18.0 15.0 900 240 e3 r75mi 3180--3-- 0.22 f 7.5 13.5 18.0 15.0 900 240 e3 r75mi 3220--3-- 0.22 f 9.0 12.5 18.0 15.0 900 240 e3 r75mi 3220--7-- 0.27 f 8.5 14.5 18.0 15.0 900 240 e3 r75mi 3270--3-- 0.27 f 9.0 12.5 18.0 15.0 900 240 e3 r75mi 3270--7-- 0.33 f 10.0 16.0 18.0 15.0 900 240 e3 r75mi 3330--3-- 0.33 f 13.0 12.0 18.0 15.0 900 240 e3 r75mi 3330--7-- 0.39 f 10.0 16.0 18.0 15.0 900 240 e3 r75mi 3390--3-- 0.47 f 10.0 16.0 18.0 15.0 900 240 e3 r75mi 3470--3-- 0.56 f 11.0 19.0 18.0 15.0 900 240 e3 r75mi 3560--3-- all dimensions are mm. note: if the working voltage (v) is lower than the rated voltage (v r ), the capacitor may work at higher dv/dt. in this case the maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio v r /v. the pulse characteristic k 0 depends on the voltage wave-form and in any case it cannot overcome the value given in the above table. the dv/dt test is carried out at 2 times the above values. * not suitable for across-the-line applications. please refer to interference suppression capacitors (page 151) mechanical version and packaging (table1) internal use tolerance: j (5%); k (10%); m (20%) mechanical version and packaging (table1) internal use tolerance: j (5%); k (10%); m (20%) rated cap. 400vdc / 220vac* std dimensions max dv/dt max k 0 part number b h l p (v/ s) (v 2 / s) 0.18 f 6.0 15.0 26.5 22.5 300 144 e3 r75mn 3180--3-- 0.22 f 6.0 15.0 26.5 22.5 300 144 e3 r75mn 3220--3-- 0.27 f 6.0 15.0 26.5 22.5 300 144 e3 r75mn 3270--3-- 0.33 f 6.0 15.0 26.5 22.5 300 144 e3 r75mn 3330--3-- 0.39 f 7.0 16.0 26.5 22.5 300 144 e3 r75mn 3390--3-- 0.47 f 7.0 16.0 26.5 22.5 300 144 e3 r75mn 3470--3-- 0.56 f 8.5 17.0 26.5 22.5 300 144 e3 r75mn 3560--3-- 0.68 f 10.0 18.5 26.5 22.5 300 144 e3 r75mn 3680--3-- 0.82 f 10.0 18.5 26.5 22.5 300 144 e3 r75mn 3820--3-- 1.0 f 11.0 20.0 26.5 22.5 300 144 e3 r75mn 4100--3-- 1.2 f 13.0 22.0 26.5 22.5 300 144 e3 r75mn 4120--3-- 1.5 f 13.0 22.0 26.5 22.5 300 144 e3 r75mn 4150--3-- 0.56 f 9.0 17.0 32.0 27.5 130 104 e3 r75mr 3560--3-- 0.68 f 9.0 17.0 32.0 27.5 130 104 e3 r75mr 3680--3-- 0.82 f 9.0 17.0 32.0 27.5 130 104 e3 r75mr 3820--3-- 1.0 f 11.0 20.0 32.0 27.5 130 104 e3 r75mr 4100--4-- 1.2 f 11.0 20.0 32.0 27.5 130 104 e3 r75mr 4120--3-- 1.5 f 13.0 22.0 32.0 27.5 130 104 e3 r75mr 4150--3-- 1.8 f 13.0 22.0 32.0 27.5 130 104 e3 r75mr 4180--3-- 2.2 f 13.0 25.0 32.0 27.5 130 104 e3 r75mr 4220--4-- 2.7 f 14.0 28.0 32.0 27.5 130 104 e3 r75mr 4270--3-- 3.3 f 18.0 33.0 32.0 27.5 130 104 e3 r75mr 4330--3-- 3.9 f 18.0 33.0 32.0 27.5 130 104 e3 r75mr 4390--3-- 4.7 f 22.0 37.0 32.0 27.5 130 104 e3 r75mr 4470--3-- 5.6 f 22.0 37.0 32.0 27.5 130 104 e3 r75mr 4560--3-- 1.2 f 11.0 22.0 41.5 37.5 70 56 e3 r75mw 4120--3-- 1.5 f 11.0 22.0 41.5 37.5 70 56 e3 r75mw 4150--3-- 1.8 f 11.0 22.0 41.5 37.5 70 56 e3 r75mw 4180--3-- 2.2 f 11.0 22.0 41.5 37.5 70 56 e3 r75mw 4220--3-- 2.7 f 13.0 24.0 41.5 37.5 70 56 e3 r75mw 4270--3-- 3.3 f 16.0 28.5 41.5 37.5 70 56 e3 r75mw 4330--3-- 3.9 f 16.0 28.5 41.5 37.5 70 56 e3 r75mw 4390--3-- 4.7 f 19.0 32.0 41.5 37.5 70 56 e3 r75mw 4470--3-- 5.6 f 19.0 32.0 41.5 37.5 70 56 e3 r75mw 4560--3-- 6.8 f 19.0 32.0 41.5 37.5 70 56 e3 r75mw 4680--3-- 8.2 f 20.0 40.0 41.5 37.5 70 56 e3 r75mw 4820--3-- 10.0 f 20.0 40.0 41.5 37.5 70 56 e3 r75mw 5100--4-- 12.0 f 24.0 44.0 41.5 37.5 70 56 e3 r75mw 5120--3-- 15.0 f 30.0 45.0 41.5 37.5 70 56 e3 r75mw 5150--3-- rated cap. 400vdc / 200vac reduced sizes max dv/dt max k 0 part number b h l p (v/ s) (v 2 / s) 0.027 f 4.0 9.0 10.0 7.5 390 312 e3 r75md 2270--b-- 0.033 f 5.0 10.5 10.0 7.5 390 312 e3 r75md 2330--b-- 0.039 f 5.0 10.5 10.0 7.5 390 312 e3 r75md 2390--b-- 0.047 f 5.0 10.5 10.0 7.5 390 312 e3 r75md 2470--b -- 0.056 f 6.0 12.0 10.5 7.5 390 312 e3 r75md 2560--a-- 0.068 f 6.0 12.0 10.5 7.5 390 312 e3 r75md 2680--a-- the derating curves of previous table are not included this catalogue, available upon request.
09/2008 109 r75 mkp series high performances me t a ll i z e d po lypropylene fi l m capaci t or d .c. an d pu l se app l ica t ions product code: r75 (digit 12: 0 to 9) 1 section (630vdc) single sided metallized polypropylene flm rated cap. 630vdc / 250vac* std dimensions max dv/dt max k 0 part number b h l p (v/ s) (v 2 / s) 1000 pf 4.0 9.0 10.0 7.5 2400 760 e3 r75pd1100--4-- 1200 pf 4.0 9.0 10.0 7.5 2400 760 e3 r75pd1120--4-- 1500 pf 4.0 9.0 10.0 7.5 2400 760 e3 r75pd1150--4-- 1800 pf 4.0 9.0 10.0 7.5 2400 760 e3 r75pd1180--4-- 2200 pf 4.0 9.0 10.0 7.5 2400 760 e3 r75pd1220--4-- 2700 pf 4.0 9.0 10.0 7.5 2400 760 e3 r75pd1270--4-- 3300 pf 4.0 9.0 10.0 7.5 2400 760 e3 r75pd1330--4-- 3900 pf 4.0 9.0 10.0 7.5 2400 760 e3 r75pd1390--4-- 4700 pf 4.0 9.0 10.0 7.5 2400 760 e3 r75pd1470--4-- 5600 pf 4.0 9.0 10.0 7.5 2400 760 e3 r75pd1560--4-- 6800 pf 4.0 9.0 10.0 7.5 2400 760 e3 r75pd1680--4-- 8200 pf 4.0 9.0 10.0 7.5 2400 760 e3 r75pd1820--4-- 0.010 f 5.0 10.5 10.0 7.5 2400 760 e3 r75pd2100--4-- 0.012 f 5.0 10.5 10.0 7.5 2400 760 e3 r75pd2120--4-- 0.015 f 6.0 12.0 10.5 7.5 2400 760 e3 r75pd2150--3-- 0.018 f 6.0 12.0 10.5 7.5 2400 760 e3 r75pd2180--3-- 1000 pf 4.0 9.0 13.0 10.0 2000 690 e3 r75pf 1100--0-- 1200 pf 4.0 9.0 13.0 10.0 2000 690 e3 r75pf 1120--0-- 1500 pf 4.0 9.0 13.0 10.0 2000 690 e3 r75pf 1150--0-- 1800 pf 4.0 9.0 13.0 10.0 2000 690 e3 r75pf 1180--0-- 2200 pf 4.0 9.0 13.0 10.0 2000 690 e3 r75pf 1220--0-- 2700 pf 4.0 9.0 13.0 10.0 2000 690 e3 r75pf 1270--0-- 3300 pf 4.0 9.0 13.0 10.0 2000 690 e3 r75pf 1330--0-- 3900 pf 4.0 9.0 13.0 10.0 2000 690 e3 r75pf 1390--0-- 4700 pf 4.0 9.0 13.0 10.0 2000 690 e3 r75pf 1470--0-- 5600 pf 4.0 9.0 13.0 10.0 2000 690 e3 r75pf 1560--0-- 6800 pf 4.0 9.0 13.0 10.0 2000 690 e3 r75pf 1680--0-- 8200 pf 4.0 9.0 13.0 10.0 2000 690 e3 r75pf 1820--0-- 0.010 f 4.0 9.0 13.0 10.0 2000 690 e3 r75pf 2100--3-- 0.012 f 4.0 9.0 13.0 10.0 2000 690 e3 r75pf 2120--3-- 0.015 f 5.0 11.0 13.0 10.0 2000 690 e3 r75pf 2150--3-- 0.018 f 5.0 11.0 13.0 10.0 2000 690 e3 r75pf 2180--3-- 0.022 f 6.0 12.0 13.0 10.0 2000 690 e3 r75pf 2220--3-- 0.027 f 5.0 11.0 18.0 15.0 1000 504 e3 r75pi 2270--0-- 0.033 f 5.0 11.0 18.0 15.0 1000 504 e3 r75pi 2330--0-- 0.039 f 5.0 11.0 18.0 15.0 1000 504 e3 r75pi 2390--3-- 0.047 f 5.0 11.0 18.0 15.0 1000 504 e3 r75pi 2470--3-- 0.056 f 5.0 11.0 18.0 15.0 1000 504 e3 r75pi 2560--3-- 0.068 f 6.0 12.0 18.0 15.0 1000 504 e3 r75pi 2680--3-- 0.082 f 6.0 12.0 18.0 15.0 1000 504 e3 r75pi 2820--3-- 0.10 f 7.5 13.5 18.0 15.0 1000 504 e3 r75pi 3100--3-- 0.10 f 9.0 12.5 18.0 15.0 1000 504 e3 r75pi 3100--7-- 0.12 f 7.5 13.5 18.0 15.0 1000 504 e3 r75pi 3120--3-- 0.12 f 9.0 12.5 18.0 15.0 1000 504 e3 r75pi 3120--7-- 0.15 f 8.5 14.5 18.0 15.0 1000 504 e3 r75pi 3150--3-- 0.15 f 13.0 12.0 18.0 15.0 1000 504 e3 r75pi 3150--7-- 0.18 f 10.0 16.0 18.0 15.0 1000 504 e3 r75pi 3180--3-- 0.18 f 13.0 12.0 18.0 15.0 1000 504 e3 r75pi 3180--7-- 0.22 f 10.0 16.0 18.0 15.0 1000 504 e3 r75pi 3220--3-- 0.27 f 11.0 19.0 18.0 15.0 1000 504 e3 r75pi 3270--3-- 0.33 f 11.0 19.0 18.0 15.0 1000 504 e3 r75pi 3330--3-- mechanical version and packaging (table1) internal use tolerance: j (5%); k (10%); m (20%) mechanical version and packaging (table1) internal use tolerance: j (5%); k (10%); m (20%) all dimensions are mm. note: if the working voltage (v) is lower than the rated voltage (v r ), the capacitor may work at higher dv/dt. in this case the maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio v r /v. the pulse characteristic k 0 depends on the voltage wave-form and in any case it cannot overcome the value given in the above table. the dv/dt test is carried out at 2 times the above values. * not suitable for across-the-line applications. please refer to interference suppression capacitors (page 151) rated cap. 630vdc / 250vac* std dimensions max dv/dt max k 0 part number b h l p (v/ s) (v 2 / s) 0.082 f 6.0 15.0 26.5 22.5 400 315 e3 r75pn 2820--3-- 0.10 f 6.0 15.0 26.5 22.5 400 315 e3 r75pn 3100--3-- 0.12 f 6.0 15.0 26.5 22.5 400 315 e3 r75pn 3120--3-- 0.15 f 6.0 15.0 26.5 22.5 400 315 e3 r75pn 3150--3-- 0.18 f 7.0 16.0 26.5 22.5 400 315 e3 r75pn 3180--3-- 0.22 f 7.0 16.0 26.5 22.5 400 315 e3 r75pn 3220--3-- 0.27 f 8.5 17.0 26.5 22.5 400 315 e3 r75pn 3270--3-- 0.33 f 10.0 18.5 26.5 22.5 400 315 e3 r75pn 3330--3-- 0.39 f 10.0 18.5 26.5 22.5 400 315 e3 r75pn 3390--3-- 0.47 f 11.0 20.0 26.5 22.5 400 315 e3 r75pn 3470--3-- 0.56 f 11.0 20.0 26.5 22.5 400 315 e3 r75pn 3560--3-- 0.68 f 13.0 22.0 26.5 22.5 400 315 e3 r75pn 3680--3-- 0.39 f 9.0 17.0 32.0 27.5 180 227 e3 r75pr 3390--3-- 0.47 f 9.0 17.0 32.0 27.5 180 227 e3 r75pr 3470--4-- 0.56 f 11.0 20.0 32.0 27.5 180 227 e3 r75pr 3560--3-- 0.68 f 11.0 20.0 32.0 27.5 180 227 e3 r75pr 3680--3-- 0.82 f 13.0 22.0 32.0 27.5 180 227 e3 r75pr 3820--3-- 1.0 f 13.0 22.0 32.0 27.5 180 227 e3 r75pr 4100--3-- 1.2 f 14.0 28.0 32.0 27.5 180 227 e3 r75pr 4120--4-- 1.5 f 14.0 28.0 32.0 27.5 180 227 e3 r75pr 4150--3-- 1.8 f 18.0 33.0 32.0 27.5 180 227 e3 r75pr 4180--3-- 2.2 f 18.0 33.0 32.0 27.5 180 227 e3 r75pr 4220--3-- 2.7 f 22.0 37.0 32.0 27.5 180 227 e3 r75pr 4270--3-- 3.3 f 22.0 37.0 32.0 27.5 180 227 e3 r75pr 4330--3-- 0.68 f 11.0 22.0 41.5 37.5 90 113 e3 r75pw 3680--3-- 0.82 f 11.0 22.0 41.5 37.5 90 113 e3 r75pw 3820--3-- 1.0 f 11.0 22.0 41.5 37.5 90 113 e3 r75pw 4100--3-- 1.2 f 13.0 24.0 41.5 37.5 90 113 e3 r75pw 4120--3-- 1.5 f 13.0 24.0 41.5 37.5 90 113 e3 r75pw 4150--3-- 1.8 f 16.0 28.5 41.5 37.5 90 113 e3 r75pw 4180--3-- 2.2 f 16.0 28.5 41.5 37.5 90 113 e3 r75pw 4220--3-- 2.7 f 19.0 32.0 41.5 37.5 90 113 e3 r75pw 4270--3-- 3.3 f 19.0 32.0 41.5 37.5 90 113 e3 r75pw 4330--3-- 3.9 f 19.0 32.0 41.5 37.5 90 113 e3 r75pw 4390--4-- 4.7 f 20.0 40.0 41.5 37.5 90 113 e3 r75pw 4470--3-- 5.6 f 20.0 40.0 41.5 37.5 90 113 e3 r75pw 4560--4-- 6.8 f 24.0 44.0 41.5 37.5 90 113 e3 r75pw 4680--3-- 8.2 f 30.0 45.0 41.5 37.5 90 113 e3 r75pw 4820--3-- rated cap. 630vdc / 220vac* reduced sizes max dv/dt max k 0 part number b h l p (v/ s) (v 2 / s) 0.010 f 4.0 9.0 10.0 7.5 600 760 e3 r75pd2100 -- b -- 0.012 f 4.0 9.0 10.0 7.5 600 760 e3 r75pd2120 -- b -- 0.015 f 5.0 10.5 10.0 7.5 600 760 e3 r75pd2150 -- b -- 0.018 f 5.0 10.5 10.0 7.5 600 760 e3 r75pd2180 -- b -- 0.022 f 6.0 12.0 10.5 7.5 600 760 e3 r75pd2220 -- a -- 0.027 f 6.0 12.0 10.5 7.5 600 760 e3 r75pd2270 -- a -- the derating curves of previous table are not included this catalogue, available upon request.
09/2008 110 r75 mkp series high performances me t a ll i z e d po lypropylene fi l m capaci t or d .c. an d pu l se app l ica t ions product code: r75 (digit 12: 0 to 9) 1 section (1000vdc/250vac) single sided metallized polypropylene flm mechanical version and packaging (table1) internal use tolerance: j (5%); k (10%); m (20%) all dimensions are mm. note: if the working voltage (v) is lower than the rated voltage (v r ), the capacitor may work at higher dv/dt. in this case the maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio v r /v. the pulse characteristic k 0 depends on the voltage wave- form and in any case it cannot overcome the value given in the above table. the dv/dt test is carried out at 2 times the above values. 3 sections (1000vdc/400vac) single sided metallized polypropylene flm mechanical version and packaging (table1) internal use tolerance: j (5%); k (10%); m (20%) rated cap. 1000vdc / 250vac* std dimensions max dv/dt max k 0 part number b h l p (v/ s) (v 2 s) 0.012 f 5.0 11.0 18.0 15.0 2000 900 e3 r75qi 2120--0-- 0.015 f 5.0 11.0 18.0 15.0 2000 900 e3 r75qi 2150--0-- 0.018 f 5.0 11.0 18.0 15.0 2000 900 e3 r75qi 2180--0-- 0.022 f 5.0 11.0 18.0 15.0 2000 900 e3 r75qi 2220--0-- 0.027 f 6.0 12.0 18.0 15.0 2000 900 e3 r75qi 2270--0-- 0.033 f 6.0 12.0 18.0 15.0 2000 900 e3 r75qi 2330--0-- 0.039 f 7.5 13.5 18.0 15.0 2000 900 e3 r75qi 2390--0-- 0.047 f 7.5 13.5 18.0 15.0 2000 900 e3 r75qi 2470--0-- 0.047 f 9.0 12.5 18.0 15.0 2000 900 e3 r75qi 2470--6-- 0.056 f 8.5 14.5 18.0 15.0 2000 900 e3 r75qi 2560--0-- 0.056 f 9.0 12.5 18.0 15.0 2000 900 e3 r75qi 2560--6-- 0.068 f 8.5 14.5 18.0 15.0 2000 900 e3 r75qi 2680--0-- 0.068 f 13.0 12.0 18.0 15.0 2000 900 e3 r75qi 2680--6-- 0.082 f 10.0 16.0 18.0 15.0 2000 900 e3 r75qi 2820--0-- 0.10 f 11.0 19.0 18.0 15.0 2000 900 e3 r75qi 3100--0-- 0.047 f 6.0 15.0 26.5 22.5 600 600 e3 r75qn 2470--0-- 0.056 f 6.0 15.0 26.5 22.5 600 600 e3 r75qn 2560--0-- 0.068 f 6.0 15.0 26.5 22.5 600 600 e3 r75qn 2680--0-- 0.082 f 7.0 16.0 26.5 22.5 600 600 e3 r75qn 2820--0-- 0.10 f 7.0 16.0 26.5 22.5 600 600 e3 r75qn 3100--0-- 0.12 f 8.5 17.0 26.5 22.5 600 600 e3 r75qn 3120--0-- 0.15 f 10.0 18.5 26.5 22.5 600 600 e3 r75qn 3150--0-- 0.18 f 10.0 18.5 26.5 22.5 600 600 e3 r75qn 3180--0-- 0.22 f 11.0 20.0 26.5 22.5 600 600 e3 r75qn 3220--0-- 0.15 f 9.0 17.0 32.0 27.5 200 400 e3 r75qr 3150--0-- 0.18 f 9.0 17.0 32.0 27.5 200 400 e4 r75qr 3180--0-- 0.22 f 11.0 20.0 32.0 27.5 200 400e4 r75qr 3220--1-- 0.27 f 11.0 20.0 32.0 27.5 200 400 e3 r75qr 3270--0-- 0.33 f 13.0 22.0 32.0 27.5 200 400 e3 r75qr 3330--0-- 0.39 f 13.0 22.0 32.0 27.5 200 400 e3 r75qr 3390--0-- 0.47 f 13.0 25.0 32.0 27.5 200 400 e3 r75qr 3470--1-- 0.56 f 14.0 28.0 32.0 27.5 200 400 e3 r75qr 3560--1-- 0.68 f 18.0 33.0 32.0 27.5 200 400 e3 r75qr 3680--0-- 0.82 f 18.0 33.0 32.0 27.5 200 400 e3 r75qr 3820--0-- 1.0 f 18.0 33.0 32.0 27.5 200 400 e3 r75qr 4100--0-- 1.2 f 22.0 37.0 32.0 27.5 200 400 e4 r75qr 4120--0-- 1.5 f 22.0 37.0 32.0 27.5 200 400 e3 r75qr 4150--0-- 0.27 f 11.0 22.0 41.5 37.5 150 300 e3 r75qw 3270--0-- 0.33 f 11.0 22.0 41.5 37.5 150 300 e3 r75qw 3330--0-- 0.39 f 11.0 22.0 41.5 37.5 150 300 e3 r75qw 3390--0-- 0.47 f 11.0 22.0 41.5 37.5 150 300 e3 r75qw 3470--0-- 0.56 f 13.0 24.0 41.5 37.5 150 300 e3 r75qw 3560--0-- 0.68 f 13.0 24.0 41.5 37.5 150 300e3 r75qw 3680--0-- 0.82 f 16.0 28.5 41.5 37.5 150 300 e3 r75qw 3820--0-- 1.0 f 16.0 28.5 41.5 37.5 150 300 e3 r75qw 4100--0-- 1.2 f 19.0 32.0 41.5 37.5 150 300 e3 r75qw 4120--0-- 1.5 f 19.0 32.0 41.5 37.5 150 300 e3 r75qw 4150--0-- 1.8 f 20.0 40.0 41.5 37.5 150 300 e3 r75qw 4180--0-- 2.2 f 20.0 40.0 41.5 37.5 150 300 e3 r75qw 4220--0-- 2.7 f 24.0 44.0 41.5 37.5 150 300 e3 r75qw 4270--0-- 3.3 f 30.0 45.0 41.5 37.5 150 300 e3 r75qw 4330--0-- 3.9 f 30.0 45.0 41.5 37.5 150 300 e3 r75qw 4390--0-- note: * not suitable for across-the-line applications. please refer to interference suppression capacitors (page 151 ) rated cap. 1000vdc / 400vac std dimensions max dv/dt max k 0 part number b h l p (v/ s) (v 2 / s) 220 pf 3.0 8.0 10.0 7.5 4000 8.0 e6 r75qd 0220--3-- 270 pf 3.0 8.0 10.0 7.5 4000 8.0 e6 r75qd 0270--3-- 330 pf 3.0 8.0 10.0 7.5 4000 8.0 e6 r75qd 0330--3-- 390 pf 3.0 8.0 10.0 7.5 4000 8.0 e6 r75qd 0390--3-- 470 pf 3.0 8.0 10.0 7.5 4000 8.0 e6 r75qd 0470--3-- 560 pf 3.0 8.0 10.0 7.5 4000 8.0 e6 r75qd 0560--3-- 680 pf 3.0 8.0 10.0 7.5 4000 8.0 e6 r75qd 0680--3-- 820 pf 3.0 8.0 10.0 7.5 4000 8.0 e6 r75qd 0820--3-- 1000 pf 3.0 8.0 10.0 7.5 4000 8.0 e6 r75qd 1100--3-- 1200 pf 4.0 9.0 10.0 7.5 4000 8.0 e6 r75qd 1120--3-- 1500 pf 4.0 9.0 10.0 7.5 4000 8.0 e6 r75qd 1150--3-- 1800 pf 4.0 9.0 10.0 7.5 4000 8.0 e6 r75qd 1180--3-- 2200 pf 4.0 9.0 10.0 7.5 4000 8.0 e6 r75qd 1220--3-- 2700 pf 4.0 9.0 10.0 7.5 4000 8.0 e6 r75qd 1270--3-- 3300 pf 4.0 9.0 10.0 7.5 4000 8.0 e6 r75qd 1330--3-- 3900 pf 5.0 10.5 10.0 7.5 4000 8.0 e6 r75qd 1390--3-- 4700 pf 5.0 10.5 10.0 7.5 4000 8.0 e6 r75qd 1470--3-- 5600 pf 5.0 10.5 10.0 7.5 4000 8.0 e6 r75qd 1560--3-- 6800 pf 6.0 12.0 10.5 7.5 4000 8.0 e6 r75qd 1680--3-- 8200 pf 6.0 12.0 10.5 7.5 4000 8.0 e6 r75qd 1820-- 3 --
09/2008 111 r75 mkp series high performances me t a ll i z e d po lypropylene fi l m capaci t or d .c. an d pu l se app l ica t ions product code: r75 (digit 12: 0 to 9) mechanical version and packaging (table1) internal use tolerance: j (5%); k (10%); m (20%) all dimensions are mm. note: if the working voltage (v) is lower than the rated voltage (v r ), the capacitor may work at higher dv/dt. in this case the maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio v r /v. the pulse characteristic k 0 depends on the voltage wave-form and in any case it cannot overcome the value given in the above table. the dv/dt test is carried out at 2 times the above values. single sided metallized polypropylene flm 3 sections (1250vdc)-(1600vdc) rated cap. 1250vdc / 600vac std dimensions max dv/dt max k 0 part number b h l p (v/ s) (v 2 / s) 8200 pf 5.0 11.0 18.0 15.0 3300 825 e4 r75ri 1820--3 -- 0.010 f 5.0 11.0 18.0 15.0 3300 825 e4 r75ri 2100--3-- 0.012 f 6.0 12.0 18.0 15.0 3300 825 e4 r75ri 2120--3-- 0.015 f 6.0 12.0 18.0 15.0 3300 825 e4 r75ri 2150 --3-- 0.018 f 7.5 13.5 18.0 15.0 3300 825 e4 r75ri 2180--3-- 0.022 f 7.5 13.5 18.0 15.0 3300 825 e4 r75ri 2220--3-- 0.022 f 9.0 12.5 18.0 15.0 3300 825 e4 r75ri 2220--7-- 0.027 f 8.5 14.5 18.0 15.0 3300 825 e4 r75ri 2270--3-- 0.027 f 13.0 12.0 18.0 15.0 3300 825 e4 r75ri 2270--7-- 0.033 f 10.0 16.0 18.0 15.0 3300 825 e4 r75ri 2330--3-- 0.033 f 13.0 12.0 18.0 15.0 3300 825 e4 r75ri 2330--7 -- 0.039 f 10.0 16.0 18.0 15.0 3300 825 e4 r75ri 2390--3-- 0.047 f 11.0 19.0 18.0 15.0 3300 825 e4 r75ri 2470--3-- 0.056 f 11.0 19.0 18.0 15.0 3300 825 e4 r75ri 2560 --3-- 0.033 f 6.0 15.0 26.5 22.5 2100 525 e4 r75rn 2330--3-- 0.039 f 6.0 15.0 26.5 22.5 2100 525 e4 r75rn 2390--3-- 0.047 f 7.0 16.0 26.5 22.5 2100 525 e4 r75rn 2470--3-- 0.056 f 7.0 16.0 26.5 22.5 2100 525 e4 r75rn 2560--3-- 0.068 f 8.5 17.0 26.5 22.5 2100 525 e4 r75rn 2680--3-- 0.082 f 10.0 18.5 26.5 22.5 2100 525 e4 r75rn 2820--3-- 0.10 f 10.0 18.5 26.5 22.5 2100 525 e4 r75rn 3100--3 -- 0.12 f 11.0 20.0 26.5 22.5 2100 525 e4 r75rn 3120--3-- 0.15 f 13.0 22.0 26.5 22.5 2100 525 e4 r75rn 3150--3-- 0.10 f 9.0 17.0 32.0 27.5 500 125 e4 r75rr 3100 --4-- 0.12 f 9.0 17.0 32.0 27.5 500 125 e4 r75rr 3120--4-- 0.15 f 11.0 20.0 32.0 27.5 500 125 e4 r75rr 3150--4-- 0.18 f 11.0 20.0 32.0 27.5 500 125 e4 r75rr 3180--4-- 0.22 f 13.0 22.0 32.0 27.5 500 125 e4 r75rr 3220--4-- 0.27 f 13.0 25.0 32.0 27.5 500 125 e4 r75rr 3270--4-- 0.33 f 13.0 25.0 32.0 27.5 500 125 e4 r75rr 3330--4 -- 0.39 f 18.0 33.0 32.0 27.5 500 125 e4 r75rr 3390--4-- 0.47 f 18.0 33.0 32.0 27.5 500 125 e4 r75rr 3470--4-- 0.56 f 18.0 33.0 32.0 27.5 500 125 e4 r75rr 3560--4-- 0.68 f 22.0 37.0 32.0 27.5 500 125 e4 r75rr 3680--4-- 0.82 f 22.0 37.0 32.0 27.5 500 125 e4 r75rr 3820--4-- 0.27 f 11.0 22.0 41.5 37.5 360 125 e4 r75rw 3270--3-- 0.33 f 11.0 22.0 41.5 37.5 360 125 e4 r75rw 3330--3-- 0.39 f 13.0 24.0 41.5 37.5 360 125 e4 r75rw 3390--3-- 0.47 f 16.0 28.5 41.5 37.5 360 125 e4 r75rw 3470--4-- 0.56 f 16.0 28.5 41.5 37.5 360 125 e4 r75rw 3560--4-- 0.68 f 16.0 28.5 41.5 37.5 360 125 e4 r75rw 3680--4-- 0.82 f 19.0 32.0 41.5 37.5 360 125 e4 r75rw 3820--4-- 1.0 f 20.0 40.0 41.5 37.5 360 125 e4 r75rw 4100--3-- 1.2 f 20.0 40.0 41.5 37.5 360 125 e4 r75rw 4120--4-- 1.5 f 24.0 44.0 41.5 37.5 360 125 e4 r75rw 4150--4-- 1.8 f 24.0 44.0 41.5 37.5 360 125 e4 r75rw 4180--3-- 2.2 f 30.0 45.0 41.5 37.5 360 125 e4 r75rw 4220--3-- mechanical version and packaging (table1) internal use tolerance: j (5%); k (10%); m (20%) rated cap. 1600vdc / 650vac std dimensions max dv/dt max k 0 part number b h l p (v/ s) (v 2 / s) 3900 pf 4.0 10.0 18.0 15.0 6000 1900 e4 r75ti 1390--3-- 4700 pf 4.0 10.0 18.0 15.0 6000 1900 e4 r75ti 1470--3-- 5600 pf 5.0 11.0 18.0 15.0 6000 1900 e4 r75ti 1560--3-- 6800 pf 5.0 11.0 18.0 15.0 6000 1900 e4 r75ti 1680--3-- 8200 pf 6.0 12.0 18.0 15.0 6000 1900 e4 r75ti 1820--3-- 0.010 f 6.0 12.0 18.0 15.0 6000 1900 e4 r75ti 2100--3-- 0.012 f 7.5 13.5 18.0 15.0 6000 1900 e4 r75ti 2120--3-- 0.015 f 7.5 13.5 18.0 15.0 6000 1900 e4 r75ti 2150--3-- 0.018 f 8.5 14.5 18.0 15.0 6000 1900 e4 r75ti 2180--3-- 0.018 f 9.0 12.5 18.0 15.0 6000 1900 e4 r75ti 2180--7-- 0.022 f 10.0 16.0 18.0 15.0 6000 1900 e4 r75ti 2220--3-- 0.022 f 13.0 12.0 18.0 15.0 6000 1900 e4 r75ti 2220--7 -- 0.027 f 10.0 16.0 18.0 15.0 6000 1900 e4 r75ti 2270--3-- 0.033 f 11.0 19.0 18.0 15.0 6000 1900 e4 r75ti 2330--3-- 0.027 f 6.0 15.0 26.5 22.5 3000 960 e4 r75tn 2270 --3-- 0.033 f 7.0 16.0 26.5 22.5 3000 960 e4 r75tn 2330--3-- 0.039 f 7.0 16.0 26.5 22.5 3000 960 e4 r75tn 2390--3-- 0.047 f 8.5 17.0 26.5 22.5 3000 960 e4 r75tn 2470--3-- 0.056 f 10.0 18.5 26.5 22.5 3000 960 e4 r75tn 2560--3-- 0.068 f 10.0 18.5 26.5 22.5 3000 960 e4 r75tn 2680--3-- 0.082 f 11.0 20.0 26.5 22.5 3000 960 e4 r75tn 2820--3-- 0.10 f 13.0 22.0 26.5 22.5 3000 960 e4 r75tn 3100--3-- 0.12 f 13.0 22.0 26.5 22.5 3000 960 e4 r75tn 3120--3 -- 0.068 f 9.0 17.0 32.0 27.5 1500 480 e4 r75tr 2680--3-- 0.082 f 9.0 17.0 32.0 27.5 1500 480 e4 r75tr 2820--3-- 0.10 f 11.0 20.0 32.0 27.5 1500 480 e4 r75tr 3100 --4-- 0.12 f 11.0 20.0 32.0 27.5 1500 480 e4 r75tr 3120--3-- 0.15 f 13.0 22.0 32.0 27.5 1500 480 e4 r75tr 3150--3-- 0.18 f 13.0 22.0 32.0 27.5 1500 480 e4 r75tr 3180--3-- 0.22 f 13.0 25.0 32.0 27.5 1500 480 e4 r75tr 3220--4-- 0.27 f 18.0 33.0 32.0 27.5 1500 480 e4 r75tr 3270--3-- 0.33 f 18.0 33.0 32.0 27.5 1500 480 e4 r75tr 3330--3-- 0.39 f 18.0 33.0 32.0 27.5 1500 480 e4 r75tr 3390--3-- 0.47 f 22.0 37.0 32.0 27.5 1500 480 e4 r75tr 3470--3 -- 0.56 f 22.0 37.0 32.0 27.5 1500 480 e4 r75tr 3560--3-- 0.18 f 11.0 22.0 41.5 37.5 750 240 e4 r75tw 3180--3-- 0.22 f 11.0 22.0 41.5 37.5 750 240 e4 r75tw 3220 --3-- 0.27 f 13.0 24.0 41.5 37.5 750 240 e4 r75tw 3270--3-- 0.33 f 16.0 28.5 41.5 37.5 750 240 e4 r75tw 3330--3-- 0.39 f 16.0 28.5 41.5 37.5 750 240 e4 r75tw 3390--3-- 0.47 f 16.0 28.5 41.5 37.5 750 240 e4 r75tw 3470--3-- 0.56 f 19.0 32.0 41.5 37.5 750 240 e4 r75tw 3560--3-- 0.68 f 19.0 32.0 41.5 37.5 750 240 e4 r75tw 3680--3-- 0.82 f 20.0 40.0 41.5 37.5 750 240 e4 r75tw 3820--3-- 1.0 f 24.0 44.0 41.5 37.5 750 240 e4 r75tw 4100--3-- 1.2 f 24.0 44.0 41.5 37.5 750 240 e4 r75tw 4120-- 3 -- 1.5 f 30.0 45.0 41.5 37.5 750 240 e4 r75tw 4150-- 3 --
09/2008 112 r75 mkp series high performances me t a ll i z e d po lypropylene fi l m capaci t or d .c. an d pu l se app l ica t ions product code: r75 (digit 12: 0 to 9) 3 sections (2000vdc) single sided metallized polypropylene flm mechanical version and packaging (table1) internal use tolerance: j (5%); k (10%); m (20%) all dimensions are mm. note: if the working voltage (v) is lower than the rated voltage (v r ), the capacitor may work at higher dv/dt. in this case the maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio v r /v. the pulse characteristic k 0 depends on the voltage wave-form and in any case it cannot overcome the value given in the above table. the dv/dt test is carried out at 2 times the above values. rated cap. 2000vdc / 700vac std dimensions max dv/dt max k 0 part number b h l p (v/ s) (v 2 / s) 1000 pf 4.0 10.0 18.0 15.0 9500 3800 e4 r75ui 1100--4-- 1200 pf 4.0 10.0 18.0 15.0 9500 3800 e4 r75ui 1120--4-- 1500 pf 4.0 10.0 18.0 15.0 9500 3800 e4 r75ui 1150--4-- 1800 pf 4.0 10.0 18.0 15.0 9500 3800 e4 r75ui 1180--4-- 2200 pf 4.0 10.0 18.0 15.0 9500 3800 e4 r75ui 1220--4-- 2700 pf 4.0 10.0 18.0 15.0 9500 3800 e4 r75ui 1270--4-- 3300 pf 4.0 10.0 18.0 15.0 9500 3800 e4 r75ui 1330--4-- 3900 pf 5.0 11.0 18.0 15.0 9500 3800 e4 r75ui 1390--3-- 4700 pf 5.0 11.0 18.0 15.0 9500 3800 e4 r75ui 1470--3-- 5600 pf 6.0 12.0 18.0 15.0 9500 3800 e4 r75ui 1560--3-- 6800 pf 6.0 12.0 18.0 15.0 9500 3800 e4 r75ui 1680--3-- 8200 pf 7.5 13.5 18.0 15.0 9500 3800 e4 r75ui 1820--3-- 0.010 f 7.5 13.5 18.0 15.0 9500 3800 e4 r75ui 2100--3-- 0.012 f 8.5 14.5 18.0 15.0 9500 3800 e4 r75ui 2120--3-- 0.012 f 9.0 12.5 18.0 15.0 9500 3800 e4 r75ui 2120--7-- 0.015 f 8.5 14.5 18.0 15.0 9500 3800 e4 r75ui 2150--3-- 0.015 f 13.0 12.0 18.0 15.0 9500 3800 e4 r75ui 2150--7-- 0.018 f 10.0 16.0 18.0 15.0 9500 3800 e4 r75ui 2180--3-- 0.018 f 13.0 12.0 18.0 15.0 9500 3800 e4 r75ui 2180--7-- 0.022 f 11.0 19.0 18.0 15.0 9500 3800 e4 r75ui 2220--3-- 0.027 f 11.0 19.0 18.0 15.0 9500 3800 e4 r75ui 2270--3-- 4700 pf 6.0 15.0 26.5 22.5 3500 1400 e4 r75un 1470--3-- 5600 pf 6.0 15.0 26.5 22.5 3500 1400 e4 r75un 1560--3-- 6800 pf 6.0 15.0 26.5 22.5 3500 1400 e4 r75un 1680--3-- 8200 pf 6.0 15.0 26.5 22.5 3500 1400 e4 r75un 1820--3-- 0.010 f 6.0 15.0 26.5 22.5 3500 1400 e4 r75un 2100--3-- 0.012 f 6.0 15.0 26.5 22.5 3500 1400 e4 r75un 2120--3-- 0.015 f 6.0 15.0 26.5 22.5 3500 1400 e4 r75un 2150--3-- 0.018 f 6.0 15.0 26.5 22.5 3500 1400 e4 r75un 2180--3-- 0.022 f 6.0 15.0 26.5 22.5 3500 1400 e4 r75un 2220--3-- 0.027 f 7.0 16.0 26.5 22.5 3500 1400 e4 r75un 2270--3-- 0.033 f 8.5 17.0 26.5 22.5 3500 1400 e4 r75un 2330--3-- 0.039 f 10.0 18.5 26.5 22.5 3500 1400 e4 r75un 2390--3-- 0.047 f 10.0 18.5 26.5 22.5 3500 1400 e4 r75un 2470--3-- 0.056 f 11.0 20.0 26.5 22.5 3500 1400 e4 r75un 2560--3-- 0.068 f 13.0 22.0 26.5 22.5 3500 1400 e4 r75un 2680--3-- 0.047 f 9.0 17.0 32.0 27.5 1000 400 e4 r75ur 2470--3-- 0.056 f 9.0 17.0 32.0 27.5 1000 400 e4 r75ur 2560--3-- 0.068 f 9.0 17.0 32.0 27.5 1000 400 e4 r75ur 2680--4-- 0.082 f 11.0 20.0 32.0 27.5 1000 400 e4 r75ur 2820--4-- 0.10 f 11.0 20.0 32.0 27.5 1000 400 e4 r75ur 3100--3-- 0.12 f 13.0 22.0 32.0 27.5 1000 400 e4 r75ur 3120--3-- 0.15 f 13.0 25.0 32.0 27.5 1000 400 e4 r75ur 3150--4-- 0.18 f 14.0 28.0 32.0 27.5 1000 400 e4 r75ur 3180--3-- 0.22 f 14.0 28.0 32.0 27.5 1000 400 e4 r75ur 3220--4-- 0.27 f 18.0 33.0 32.0 27.5 1000 400 e4 r75ur 3270--3-- 0.33 f 18.0 33.0 32.0 27.5 1000 400 e4 r75ur 3330--4-- 0.39 f 22.0 37.0 32.0 37.5 1000 400 e4 r75ur 3390--3-- 0.47 f 22.0 37.0 32.0 27.5 1000 400 e4 r75ur 3470--4-- 0.15 f 11.0 22.0 41.5 37.5 500 200 e4 r75uw 3150--3-- 0.18 f 13.0 24.0 41.5 37.5 500 200 e4 r75uw 3180--3-- 0.22 f 13.0 24.0 41.5 37.5 500 200 e4 r75uw 3220--3-- 0.27 f 16.0 28.5 41.5 37.5 500 200 e4 r75uw 3270--3-- 0.33 f 16.0 28.5 41.5 37.5 500 200 e4 r75uw 3330--3-- 0.39 f 19.0 32.0 41.5 37.5 500 200 e4 r75uw 3390--3-- 0.47 f 19.0 32.0 41.5 37.5 500 200 e4 r75uw 3470--3-- 0.56 f 20.0 40.0 41.5 37.5 500 200 e4 r75uw 3560--4-- 0.68 f 20.0 40.0 41.5 37.5 500 200 e4 r75uw3680--3-- 0.82 f 24.0 44.0 41.5 37.5 500 200 e4 r75uw 3820--4-- 1.0 f 24.0 44.0 41.5 37.5 500 200 e4 r75uw4100--3--
09/2008 113 r75 mkp series high performances me t a ll i z e d po lypropylene fi l m capaci t or d .c. an d pu l se app l ica t ions product code: r75 (digit 12: 0 to 9) test method and performance damp heat, steady state: t est conditions temperature: +40c 2c relative humidity (rh): 93% 2% test duration: 56 days performance capacitance change | ? c/c|: 2% df change ( ? tg ): 10x10 -4 at 1khz insulation resistance: 50% of initial limit. endurance: t est conditions temperature: +85c 2c test duration: 2000 h voltage applied: 1.25xv r performance capacitance change | ? c/c|: 3% df change ( ? tg ): 10x10 -4 at 10khz for c 1 f 10x10 -4 at 0 1khz for c > 1 f insulation resistance: 50% of initial limit. resistance to soldering heat: t est conditions solder bath temperature: +260c 5c dipping time (with heat screen):10 s 1 s performance capacitance change | ? c/c|: 1% df change ( ? tg ): 10x10 -4 at 10khz for c 1 f 10x10 -4 at 0 1khz for c > 1 f insulation resistance: initial limit. long term stability (after two years) : storage: standard environmental conditions (see page 12) performance capacitance change | ? c/c|: 0.5% electrica l characteristics rated voltage (v r ): 160vdc - 250vdc - 400vdc - 630vdc -1000vdc for 1 section. 1250vdc - 1600vdc - 2000vdc for 3 sections. rated temperature (t r ): +85c t emperature derated voltage: the following decreasing factor has to be applied on the rated voltage: +85c to +105c: 2.00% per c for v r (d.c.) +85c to +105c: 1.25% per c for v r (a.c.) capacitance range: 1000 pf to 33 f for 1 section. 1000 pf to 2.2 f for 3 sections. capacitance values: e12 series (iec 60063 norm). capacitance tolerances (measured at 1 khz) : 5% (j); 10% (k); 20% (m). t otal self-inductance (l) : (lead length ~2 mm) pitch (mm) 7.5 10 15 22.5 27.5 37.5 l (nh) 8 9 10 18 18 20 dissipation factor (df): tg x10 -4 at +25c 5c khz c 0.1 f 0.1 < c 1.0 f 1 < c 4.7 f c > 4.7 f 1 10 100 0 4 0 6 25 5 8 6 10 insulation resistance: t est conditions temperature: +25 c5c voltage charge time: 1min voltage charge: 100vdc performance 1x10 5 m ? for c 0.33 f (5x10 5 m ? )* 30000 s for c >0.33 f (150000 s)* * typical value. t est voltage between terminations: 1.6xv r applied for 2 s at +25c 5c
09/2008 114 max. voltage (vr.m.s.) versus frequency (sinusoidal wave-form / th 40c) r75 mkp series high performances me t a ll i z e d po lypropylene fi l m capaci t or d .c. an d pu l se app l ica t ions product code: r75 (digit 12: 0 to 9) note: p (pitch) in mm.
09/2008 115 max. current (ir.m.s.) versus frequency (sinusoidal wave-form / th 40c) r75 mkp series high performances me t a ll i z e d po lypropylene fi l m capaci t or d .c. an d pu l se app l ica t ions product code: r75 (digit 12: 0 to 9) note: p (pitch) in mm.

▲Up To Search▲

Price & Availability of R75PD1150DQ4-J

	To Download R75PD1150DQ4-J Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .